1. Carefully read this instruction manual before operating the machine.
People who operate the machine must read and fully understand how to use the safety equipment,
and have the ability to follow and implement the regulations stated in this instruction manual.
2. Keep guards/covers in place.
All components which may endanger the operator are covered by the guards or covers.
Please keep the guards/covers in place and do not remove them without dealer or manufacturer’s consent.
3. Don’t use it in a dangerous environment.
Do not use the machine in humid or damp locations, or directly expose it to rain or sunlight.
The working area must be well lit and ventilated.
4. Store idle machine.
If you don’t want to use it for a period of time, please store it in a dry and secure environment.
5. Stand in the proper position for operation.
Please stand in front of the machine while operating it.
6. Don’t overuse the machine.
Please use it properly and follow the steps for each of the functions stated in the instruction manual.
7. Operate it while you are in good health.
For safety reasons, do not operate the machine when you are tired or unable to focus on the job.
8. Keep both hands away from the cutting area.
The machine is designed to be and only allows a one-man operation. Each single cutting action
must be operated by pressing the 2 enable switches simultaneously to avoid injury.
9. Keep away from the sharp edge of the blade.
Please wear leather gloves and use the cutter blade holders to replace or install the blade.
10. Maintain machine with care.
Repairing the machine or sharpening the blade must be carried out by qualified and well-trained
people only. If you don’t use the replacement parts from the original manufacturer, it may result in
considerable danger to the operator.
11. Waste disposal shall obey the local regulations and must be done carefully.
12. The measurement of the noise level is defined according to ISO 3746.
A weighted sound pressure level measuring under no load at operation position is 75.6Db (A),
and under load at operation position is 75.5dB (A).
13. Make sure that the machine is disconnected at the power supply.
Shut down the power before starting to do any maintenance, adjustments, or repairs.
14. Application and prohibition of using the machine.
The machine is designed for trimming paper only. For safety reasons, do not attempt to cut other
materials such as metal sheets, wood board or other objects.
15. Do not use the machine over its capacity.
Refer to the specifications of the machine shown in the instruction manual. Any modifications to
the machine are not allowed and will terminate the manufacturer’s guarantee.
16. If any transmission elements fail, do not forcefully drag the paper pile out.
17. To ensure the optimal effectiveness of the machine, the safety devices need to be checked before
operation. The test results ( see annex A) must be recorded after the blade has been changed or adjusted.
Safety Instruction:
Safety Instruction:
01
