background image

Optical Media Vacuum 
Access Door 

Optical Media Infeed 

Optical Media Control Panel 

Main Power Switch                                       
(toggles between Optical Media and Paper) 

Paper Infeed 

Paper Waste Bin Access Door 

EvenFlow

TM

 AutoOiler 

Paper Shredder Control Panel 

Safety Guidelines 

 

Do not allow children or untrained operators to use the COMBI 0030 unit. 

 

Keep loose clothing, long hair, ties, jewelry, fingers, etc. away from the infeed areas. 

 

Read this manual and keep it near the machine for reference. 

 

In case of emergency, press the Main Power Switch OFF button or unplug the machine. 

 

Repairs should be performed only by trained personnel. 

NOTE: Do not attempt to adjust or modify this unit. Doing so may deviate from DoD specifications, and you may 
lose the capacity to declassify to DoD requirements. 

The Combi 0030 is an all in one high security paper and optical media shredder designed to meet the highest levels of  
shredding and destruction for paper, CD’s, DVD’s, and Blu-Ray discs. This high security combination unit meets the 
requirements of NSA/CSS Specification 02-01 for High Security Cross-Cut Paper Shredders and Specification 04-02 
for Optical Media Destruction Devices.     

Description 

Summary of Contents for COMBI 0030









Reviews: