![background image](http://html.mh-extra.com/html/formax/6204-series/6204-series_maintenance-manual_2320048006.webp)
Terminology
Description
Term
Double Feed Control is the sensor that measures the thickness of a
sheet to check if the inserting system does not accidentally take more
sheets than intended. DFC sensors exist on Feeders (double sheet de-
tection). Currently DFC's on Neopost inserting systems perform relative
measurements, which means that they need a cycle to 'learn' the thick-
ness of a sheet.
Also the length of the document is measured so partly overlapping sheets
will be detected.
Double Feed Control (DFC)
Situation in which the top of the sheet is closest to the separation unit in
a document feeder.
Leading
The various documents of a set are fed from the feeders in such a way
that these documents are partly overlapping each other. This pane-like
overlapping ensures a higher throughput.
Pane Cycle
Documents are transported along the vertical track without touching each
other. Only after joining the set in the making they do touch each other.
Sequential Cycle
The partially completed set in the collator is moved from the collator area
in the direction of the fold unit (short shunt).
Shunting
Situation in which the bottom of the sheet is closest to the separation
unit in a document feeder.
Trailing
1
063.1
Service
Guide
3
Summary of Contents for 6204 Series
