Transport
The system, including all accessories, is transported in one box. The box is attached onto a pallet. Handle the
package with care.
DANGER:
• Do not turn the box on its side.
• Prevent the box from falling over.
• Prevent the box from shaking.
When shaking (during transport) is expected, follow this procedure:
1.
Remove the feed hoppers.
2.
Tighten the feeders.
3.
Secure the collator.
Storage
The system needs to be stored under the following conditions:
10 to 40 °C (50 to 104 °F)
Storage temperature:
30 to 80%
Humidity:
Unpacking Instructions
Removing packaging material
Remove the material as follows:
1.
Remove the cardboard A.
2.
Remove the labelled pin B.
3.
Cut the binding strap C and remove it.
4.
Open accumulation table D, by pushing the bottom half downwards and remove the foam block,
5.
Close the accumulation table.
6.
Open the top cover of the machine by means of the handle.
7.
Remove the cardboard from the insert position.
8.
Close the top cover. When doing so make sure that the top cover "locks" into position.
5
063.1
Service
Guide
43
Summary of Contents for 6204 Series
