![background image](http://html1.mh-extra.com/html/formax/3950-series/3950-series_operators-manual_2319987050.webp)
Operator's Manual
3950 Series
Automatic Setting
54
Main Menu SET-UP
Setting the Fold Length - Main Menu SET-UP
The automatic setting of the
3950 Series
makes it possible that all stops -
driven by timing belts and servo motors - are set automatically to the position
calculated by the computer.
The fold plates which are not used for a particular folding job are automatically
closed by deflectors and always remain in the fold unit.
The fold plate stops can be set in three different ways:
1. Automatic setting of pre-programmed standard folds
2. Entering the fold lengths individually on the keyboard - Special folds
3. Calling up fold programs from the memory - Job saved
Standard Folds
For this type of setting, it is not necessary to make a sample fold by hand and to
measure it. Just enter the required type of fold.
The following standard folds are permanently programmed in the software:
Single fold
Z-fold
2x
Z-fold
3x
Z-fold
4x
Letter
fold
Double parallel
fold
Open
gate fold