Fork farms FLEX FARM, Assembly Manual

Page: 13 / 24

11
Flex Farm Assembly Section 2
Assemble Caster Unit
1. Locate the caster unit (A) and an
adjustable or 3/8 inch wrench (optional).
NOTE: If your caster unit came
pre-assembled, skip to step 5.
2. Set the right and left sides of the caster
frame side-by-side on the floor, wheel
side down.
3. Line up the holes on each half and insert
the bolt through the overlapped holes.
4. Add the locking washer followed by the
threaded nut and hand tighten until
connection point is secure.
NOTE: An adjustable or 3/8 inch wrench can
be used to tighten if needed.
5. Set caster unit on the floor
wheel side down.
The pH solutions and hydrogen peroxide are
caustic materials. Keep out of reach of children.
Handle carefully to avoid personal injury.
Caution
A