Fork farms FLEX FARM, Assembly Manual

Page: 16 / 24

14
7. Take the pump out of the box and attach
the 1/2 inch fitting (included with pump).
8. Set the pump on top of the left tank lid
and thread the power cord down through
the large oval opening and then back
out of the tank through the small round
opening in the lid.
9. Identify the end of the vertical irrigation
line farthest from the valve. In the
opposite direction as the power cord,
insert this end into the tank through the
same round opening.
10. Pull the vertical irrigation line out of the
tank through the large oval opening and
connect it to the 1/2 inch fitting attached
to the pump.
Flex Farm Assembly Section 2