forest river 2014 Flagstaff Owner'S Manual Download Page 12

Page: 12 / 64

—

Tent Camper Owner’s Manual

Note: It is important to frequently check the seals in order to help prevent moisture from entering the camper,

causing rot, mold and mildew. This is especially important for campers being stored outside. If you are un-

sure how to perform the seal maintenance, consult your dealer for the correct method for renewing the seals,

or, if you prefer, have your dealer perform the seal maintenance for you.

unDer the terMs of your tent CaMper Warranty, fail-

ure to Maintain tent CaMper seals, through regular

MaintenanCe, Can leaD to severe DaMage of tent CaMper

CoMponents, anD May be ConsiDereD neglect or abusive

treatment. unDer those ConDitions, DaMages of this na-

ture are not Warrantable.

enT

ainTenanCe

enT

aTeriaL

to help prevent water damage, it is important to seal all stitched areas.

5. Set up the camper as you would when camping. Be sure all windows are zipped closed, and the storm door

window is closed and secure.

6. Remove all cushions and drapes, and store them in a dry place.

7. Saturate all seams with water and check inside the camper, for any seam leaks.

8. Allow the tent to dry completely, or wipe seams dry with a smooth white cloth before sealing.

9. Seal all seams with a wax candle or paraffin.

10. After you have sealed all stitching with one of the recommended products, and retested for leaks, then reinstall

the cushions and drapes.

are

Our

inyL

enT

abriC

Some tent fabrics are coated with vinyl to allow easier cleaning of the exterior surface. Vinyl coated fabric cannot

breathe, and condensation may form on the fabric side. The tent may appear to be leaking. This situation can be cor-

rected by opening the zippered windows slightly, to ventilate the interior of your camper, allowing the condensation

to evaporate.

OndensaTiOn

Recreational vehicles are built according to government standards which

regulate the industry, and according to RVIA standards, which are more

severe than government standards.
Follow these tips to help avoid excessive moisture in your camper:

1. Open the roof vent when cooking and/or slightly open the kitchen

vinyl window.

2. Use the power vent when bathing or showering. The power vent can also function as an attic fan, to recirculate

the air.

3. Never use a humidifier. Vaporizer use should be minimal.

4. Turn on the air conditioner briefly, after cooking or bathing, to help eliminate moisture.

Condensation is a natural occurrence. The amount of condensation will vary with the climactic conditions, par-

ticularly, relative humidity. Condensation occurs when water vapor is present in the air. When the temperature

reaches the ‘dew point’, the water vapor in the air condenses, becoming liquid. Properly ventilating your unit helps

control condensation. Condensation causes dampness, mildew, staining and, if left unchecked, may cause damage

to paneling, ceiling, fabrics, furniture, or personal belongings.
Note: Condensation is not a result of a defect. Damage from condensation remains the responsibility of the

owner.

condensation

Summary of Contents for 2014 Flagstaff

































































Search results

Summary of Contents for 2014 Flagstaff

Reviews:

Related manuals for 2014 Flagstaff

Brands by name

Popular brands

forest river 2014 Flagstaff, Owner'S Manual

Search results

Summary of Contents for 2014 Flagstaff

Reviews:

Related manuals for 2014 Flagstaff

Brands by name

Popular brands