Assembly
STEP 8:
Slide the brace top tubes
over both 25 mm handle
tubes so that the brace
rests against the ends of
the 30 mm handle tubes.
Insert an M8 handwheel (3)
into the nut on top of each
brace top tube and tighten
to secure the brace.
STEP 7:
Insert a brace (6) into
one end of the sleeve (7)
and secure with an M6
x 35 cap head bolt (2)
and M6 nut (8). Note the
larger diameter holes
in the sleeve should be
uppermost and the head
of the bolt should sit in
the large hole. Repeat for
the second brace.
LARGE HOLE
Zero Barrow
8
