Assembly
NOTE:
One end of the 30 mm handle tube has two equal
diameter holes and the other has a large and small hole.
In Steps 4 & 5 you must insert the end with two equal di-
ameter holes into the mount on the fork. In addition, the
larger of the two holes at the other end should be orient-
ed to the outside of the handle.
STEP 5:
Repeat for the other 30 mm
handle tube and fork.
STEP 6
Insert each of the 25 mm
diameter handle tubes (4)
into a 30 mm diameter
handle and secure with
an M6 x 35 mm cap head
bolt (2) and an M6 nut (8).
Note that the head of the
bolt should sit inside the
larger hole in the 30 mm
handle tube.
Zero Barrow
7
