Assembly
STEP 4:
Insert a 30 mm diameter han-
dle (1) into the locating tube
on the back of one of the forks.
Insert an M6 x 40 cap head
bolt (9) into the larger hole in
the outside of the locating tube
and through the locating tube
and the handle tube. Secure
with an M6 flange nut (8).
Note
that the head of the cap head
bolt should sit inside the large
hole in the locating tube. See
note on Page 7.
STEP 3:
Repeat the procedure for the second wheel, ensuring that plain
washers are used each side of the wheel to correctly space it
and that the grub screw is correctly located and tightened.
LARGER HOLE
Zero Barrow
6
