Forest Master Model: UWWS
5
Safety
Safety Instructions
These instructions are intended for your safety. Please read them carefully before
using the workbench and retain for future reference.
Before You Start
• Check the box and make sure all the listed parts are included. If not, contact
the retailer for assistance.
• Remove all plastic bags and packaging and dispose of them safely.
• Retain the instruction manual for future reference.
Important Safety Information
• Always check the tightness of nuts and bolts prior to use.
• Make sure the chainsaw mill is positioned on a firm and stable surface before
operating. It is best to position the frame so you are cutting downhill.
• Make sure all the adjustment thumbscrews are tight before cutting.
• Always wear appropriate safety gear; gauntlets, safety glasses, ear protection,
chainsaw trousers, safety boots and a dust mask should always be worn when
operating the chainsaw mill.
• Always start the chainsaw on the ground and then lift onto the guide bars with
your hands away from the throttle trigger - use the support bar above the
chainsaw to lift.
• Never assemble, dismantle or readjust any parts of the chainsaw mill while the
chainsaw is still running.
• Be extremely careful of the chainsaw cutting chain while in use.
• Any bystanders or pets must be a distance of at least 10 metres from the
chainsaw mill when in operation.
• Do not operate under the influence of drugs, alcohol, medication or if you feel
tired or drowsy.
• Never operate the chainsaw mill in an enclosed area - fumes from the exhaust
contain carbon monoxide which is a toxic, odourless and potentially fatal gas.
• Always turn the chainsaw off before dismounting from the guide bars.
• Always operate with one hand on the support bar and one hand on the
chainsaw.
• Never leave the chainsaw running unattended.
• You must be over the age of 18 to operate the chainsaw mill.
• Don’t overreach when milling - only operate the chainsaw from a comfortable
position.
• Don’t force the chainsaw through the cut - apply some force but ease the
blade through the wood. Over forcing the blade can cause injury and damage
the chainsaw.
The warnings, cautions and instructions referred to in this manual cannot cover
all possible conditions and situations that may occur. It must be understood
that common sense and caution must be applied by the operator when using the
chainsaw mill.
