Forest Master Model: UWWS
18
Operation
Operation
This section explains how to operate the chainsaw mill and the different processes
which can be performed on the frame for all types of work.
Mounting the Log
There are a few techniques that can be used to mount the log to the frame depend-
ing on the size and weight of the log.
• For manageable logs and timber, they can be simply lifted and placed so that
it rests on the two crossbeams. It is easier to have the guide bars as low as
possible or removed, so you don’t need to lift over them.
• For heavier logs, you can lift one end at a time and place each end on the
crossbeam. You will need to remove the guide bars for this method. To help
even further, you can position some trestles next to the frame to act as a step
so that you only lift half the height at a time for each end of the log.
• For very large or heavy logs, fold the legs in, turn the frame upside down and
place on top of the log. Then secure the frame to the log by screwing into it
through the gripping plates. The log can now be rolled over by hand or with
a log peavey so that the frame sits upright. It is usually best to perform the
first few cuts on the floor to take some weight off the log before extending the
frame.
Securing the Log
The log can be secured to the frame through the four gripping plates enabling the
user to grip from underneath and the ends of the log by screwing wood bolts into
it - We recommend using M6 flanged head coach bolts.
• When using the PTS, it is better to have the dual rails extended as little as pos-
sible for stronger securing.
• We suggest using two bolts for each gripping plated used. This is because the
more secure the log, the less it can move during the cut and therefore the bet-
ter the finish.
• The logs can also be secured through the two holes either side of the V on the
V-Slot when cutting fence posts.
