Forest Master Model: UWWS
2
Your Product
Thank you for purchasing the Forest Master Universal Woodworking Station. We
hope you are 100% satisfied with your product but if you have any questions or
queries, please don’t hesitate to contact us:
Forest Master Ltd Tel: +44 (0)191 265 5000
Industry Road Email: [email protected]
Heaton Website: www.forest-master.com
Newcastle Upon Tyne
NE6 5XB
About Your Product
The Forest Master Universal Woodworking Station is used for milling logs into all
kinds of lumber. A chainsaw is mounted to the chainsaw frame that comprises of
two C-shaped runners and an adjustable support bar. The runners slot onto the
two guide rails of the chainsaw mill, allowing the chainsaw to glide freely along the
horizontal plane, with no movement in the vertical plane, to give the smoothest
and most accurate cut possible. The chainsaw mill can be used in a variety of ways
outlined below:
• Milling slabs of wood from a large log.
• Milling multiple boards by clamping a number of slabs together, turning them
onto the side and milling off the bark on both sides.
• Creating fence posts in a quick and efficient way by drilling bolts into both
ends of the log resting the bolts into the V shaped slots. This allows the log to
be milled, unsecured, rotated 90° re secured and the milled again for all four
sides.
• Clamping a log in the vertical position to mill log coins.
• Used as a sawhorse by placing a log into the four, toothed V shaped sections
and cutting vertically with a chainsaw.
• Attaching the Forest Master Router Bed to the two guide bars to the surfaces
and edges of the wood can be routed (requires extra parts you can purchase
from Forest Master).
• It can also be used as a mitre saw stand by attaching the mounting clamps to
the frame and bolting a mitre saw to the clamps with the M6 coach bolts and
fastenings. Details of this can be found in the mitre saw stand manual.
No matter how you use your workbench, please read the safety instructions and
guidelines before use.
