FORESIGHT SIM-IN-A-BOX BIRDIE PACKAGE Assembly Instructions Manual Download Page 12

Page: 12 / 49

STEP 1:

FRAME ASSEMBLY

ASSEMBLY INSTRUCTIONS

EAGLE PLUS / BIRDIE PACKAGE

VERSION 1.1

PAGE 12

Locate the TWO (2) Rear Side Wall Top Supports (Grey Fiberglass).

Step Six:

Connect the Pink/Light Blue Rear Right Side Wall Top Support (Grey Fiberglass)

(Vertical) to the Purple/Light Blue Rear Right Side Wall Bottom Support (Grey

Fiberglass) (Vertical).

Then, connect the White/Light Blue Rear Left Side Wall Top Support (Grey Fiberglass)

(Vertical) to the Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass)

(Vertical).

Step Six:

Connect the Pink/Light Blue Rear Right Side Wall T

op Support (Grey Fiber

glass)

(Vertical) to the Purple/Light Blue Rear Right Side W

all Bottom Support (Grey

Fiberglass) (V

ertical).

Then, connect the White/Light Blue Rear Left Side Wall T

op Support (Grey Fiber

glass)

(Vertical) to the Purple/Light Blue Rear Left Side W

all Bottom Support (Grey Fiber

glass)

(Vertical).

Step Six:

Connect the Pink/Light Blue Rear Right Side Wall Top Support (Grey Fiberglass)

(Vertical) to the Purple/Light Blue Rear Right Side Wall Bottom Support (Grey

Fiberglass) (Vertical).

Then, connect the White/Light Blue Rear Left Side Wall Top Support (Grey Fiberglass)

(Vertical) to the Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass)

(Vertical).

Step Six:

Connect the Pink/Light Blue Rear Right Side Wall Top Support (Grey Fiberglass)

(Vertical) to the Purple/Light Blue Rear Right Side Wall Bottom Support (Grey

Fiberglass) (Vertical).

Then, connect the White/Light Blue Rear Left Side Wall Top Support (Grey Fiberglass)

(Vertical) to the Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass)

(Vertical).

Rear RIGHT SIDE Wall Top Supports

Rear LEFT SIDE Wall Top Supports

Connect to the step 5 assembly at the Rear
Side Wall Bottom Supports marked with the
LIGHT BLUE color code using the bolts and
nuts pre-attached to the Wall Top Supports

When finished, the assembly should

look like this

Step Five:

Connect One Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass)

(Vertical) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).

Then, connect One Purple/Light Blue Rear Left Side Wall Bottom Support (Grey

Fiberglass) (Vertical) to the Red/Purple/Light Pink Left Base (Grey Fiberglass)

(Horizontal).

Step Five:

Connect One Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass)

(Vertical) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).

Then, connect One Purple/Light Blue Rear Left Side Wall Bottom Support (Grey

Fiberglass) (Vertical) to the Red/Purple/Light Pink Left Base (Grey Fiberglass)

(Horizontal).

Summary of Contents for SIM-IN-A-BOX BIRDIE PACKAGE


















































Search results

Summary of Contents for SIM-IN-A-BOX BIRDIE PACKAGE

Reviews:

Related manuals for SIM-IN-A-BOX BIRDIE PACKAGE

Brands by name

Popular brands

FORESIGHT SIM-IN-A-BOX BIRDIE PACKAGE, Assembly Instructions Manual

Search results

Summary of Contents for SIM-IN-A-BOX BIRDIE PACKAGE

Reviews:

Related manuals for SIM-IN-A-BOX BIRDIE PACKAGE

Brands by name

Popular brands