Ford Ranger 2020, Mounting Manual, Page: 73 / 94

•
Re-paint metal edges after cutting or drilling.
All metal edges must comply with exterior and
interior protection legislation.
•
All fixings through the floor, sides or roof must
be sealed.
Refer to: 5.4 Corrosion Prevention (page 87).
•
Ensure that any additional equipment in the
vicinity of the fuel tank will not damage the
tank in a crash condition.
For any conversion structure attached to or
mounted onto the base vehicle cab structure the
following applies:
•
Ensure that neither the conversion structure
nor the existing vehicle structure get
pre-loaded by the assembly process.
•
Adhesive jointing is recommended but should
be supplemented with mechanical fasteners
to prevent initial peel and long term failure.
•
Spread bolt loads to minimize local stress.
Body Attachment Holes in Chassis Frame - Single cab
C
E
F
N
M
H
G
K
L
C
D
E
F
M
L
H
G
J
K
A
B
N
P
E134152
C
E
F
N
M
H
G
K
L
C
D
E
F
M
L
H
G
J
K
A
B
N
P
E134152
Dimensions (mm) for Body Attachment Holes in Chassis Frame - Single Cab
1086 H 16 A
95 J 28 B
768 K 23 C
893 L 20 D
509 M 1244 E
26 N 1244 F
20 P 1244 G
Date of Publication: 09/2020
FORD RANGER 2020
5 Body and P
aint
73