1.6 Electromagnetic Compatibility (EMC)
1.6.1
WARNINGS:
Do not place objects or mount equipment
on or near the airbag cover, on the side of
the seatbacks (of the front seats), or in
front seat areas that may come into
contact with a deploying airbag. Failure
to follow these instructions may increase
the risk of personal injury in the event of
a crash.
Do not fasten antenna cables to original
vehicle wiring, fuel pipes and brake pipes.
Keep antenna and power cables at least
100mm from any electronic modules and
airbags.
NOTE:
We test and certify your vehicle to meet
electromagnetic compatibility legislation (UNECE
Regulation 10 or other applicable local
requirements). It is your responsibility to make
sure that any equipment an authorized dealer
installs on your vehicle complies with applicable
local legislation and other requirements.
NOTE:
Any radio frequency transmitter
equipment in your vehicle (such as cellular
telephones and amateur radio transmitters) must
keep to the parameters in the following table. We
do not provide special provisions or conditions for
installations or use.
E239121
Antenna Position
Maximum Output Power
Watts (Peak RMS)
Frequency Band MHz
1
50
1-30
2, 3
50
50-54
2, 3
50
68-88
2, 3
50
142-176
2, 3
50
380-512
2, 3
10
806-870
NOTE:
After the installation of radio frequency
transmitters, check for disturbances from and to
all electrical equipment in your vehicle, both in
the standby and transmit modes.
Check all electrical equipment:
•
with the ignition ON
•
with the engine running
•
during a road test at various speeds
NOTE:
Check that electromagnetic fields
generated inside your vehicle cabin by the
transmitter installed do not exceed applicable
human exposure requirements.
Date of Publication: 09/2020
FORD
RANGER
2020
1 G
ener
al Inf
orma
tion
13
Summary of Contents for Ranger 2020
Page 1: ...E306837 FORD Ranger 2020 Body and Equipment Mounting Manual Date of Publication 09 2020 ...
Page 93: ......
Page 94: ......