Ford Mustang 2010 Owner'S Manual Download

Page: 81 / 314

2. Accelerate to the desired speed.

Base controls

Optional controls

3. Press the SET (+) control and release it.

4. Take your foot off the accelerator pedal.

5. The indicator

light on the instrument cluster will turn on.

Note:

•

Vehicle speed may vary momentarily when driving up and down a
steep hill.

•

If the vehicle speed increases above the set speed on a downhill, you
may want to apply the brakes to reduce the speed.

•

If the vehicle speed decreases more than 10 mph (16 km/h) below
your set speed on an uphill, your speed control will disengage.

Disengaging speed control

To disengage the speed control:

•

Tap the brake pedal or clutch pedal (if equipped)

Disengaging the speed control will not erase previous set speed.

RES

SET

Driver Controls

2010 05+ Mustang

(197)

Owners Guide, 2nd Printing
USA

(fus)

Summary of Contents for Mustang 2010



























































































































































































































































































































Search results

Summary of Contents for Mustang 2010

Reviews:

Related manuals for Mustang 2010

Brands by name

Popular brands

Ford Mustang 2010, Owner'S Manual

Search results

Summary of Contents for Mustang 2010

Reviews:

Related manuals for Mustang 2010

Brands by name

Popular brands