manualshive.com logo in svg

Ford Mustang 2010, Owner'S Manual

The Ford Mustang 2010 Owner's Manual is a comprehensive guide that enables you to unlock the full potential of your beloved car. This manual, available for download from manualshive.com, offers valuable insights, troubleshooting advice, and maintenance tips, all at your fingertips. Enhance your driving experience today with this free manual!

Share
Download
background image

BRAKE-SHIFT INTERLOCK

This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the on position unless the brake pedal is pressed.

If you cannot move the gearshift lever out of P (Park) with ignition in
the on position and the brake pedal pressed:

1. Apply the parking brake.

2. Using a flat head screwdriver or
similar tool, remove the cap.

3. Locate the access hole at the
front of the area under the cover.

4. Insert the screwdriver or similar
tool into the hole and press and
hold the lever forward while pulling
the gearshift lever out of the P
(Park) position and into the N
(Neutral) position.

5. Reinstall the cap.

6. Start the vehicle.

If it is necessary to use the above procedure to move the gearshift lever,
it is possible that a fuse has blown or the vehicle’s brake lamps are not
operating properly. Refer to

Fuses and relays

in the

Roadside

Emergencies

chapter.

WARNING:

Do not drive your vehicle until you verify that the

brakelamps are working.

WARNING:

Always set the parking brake fully and make sure

the gearshift is latched in P (Park). Turn the ignition to the off

position and remove the key whenever you leave your vehicle.

Driving

204

2010 05+ Mustang

(197)

Owners Guide, 2nd Printing
USA

(fus)

Summary of Contents for Mustang 2010



























































































































































































































































































































Reviews:

No comments

Related manuals for Mustang 2010

Kia 2011 optima Owner'S Manual preview
2011 optima
Brand: Kia Pages: 385
Roadmaster Sterling ALL-TERRAIN 576 Owner'S Manual & Installation Instructions preview
Sterling ALL-TERRAIN 576
Brand: Roadmaster Pages: 12
Whipple TOMAHAWK V1 Instruction Manual preview
TOMAHAWK V1
Brand: Whipple Pages: 3
Firestone Ride-Rite Air Helper Springs 2173 Installation Instructions preview
Ride-Rite Air Helper Springs 2173
Brand: Firestone Pages: 4
Lit Lightz RGBW Rock Lights Setup Manual preview
RGBW Rock Lights
Brand: Lit Lightz Pages: 3
Brodit ProClip 854208 Manual preview
ProClip 854208
Brand: Brodit Pages: 2
Safe Fleet PRIME DESIGN HRR-369-E-UM3-96 Manual preview
PRIME DESIGN HRR-369-E-UM3-96
Brand: Safe Fleet Pages: 12
Kocchi's 772161M1 Manual preview
772161M1
Brand: Kocchi's Pages: 4
Cadillac STS 2011 Owner'S Manual preview
STS 2011
Brand: Cadillac Pages: 529
Toro 07389 Installation Instructions Manual preview
07389
Brand: Toro Pages: 16
Mercedes-Benz 2007 SLR Mclaren Operator'S Manual preview
2007 SLR Mclaren
Brand: Mercedes-Benz Pages: 425
Thule 145012 Quick Start Manual preview
145012
Brand: Thule Pages: 2
Prorack K374 Manual preview
K374
Brand: Prorack Pages: 14
SSV Works RG4-DM3 Manual preview
RG4-DM3
Brand: SSV Works Pages: 2
ideus vv900 User Manual preview
vv900
Brand: ideus Pages: 116
Safe Fleet PRIME DESIGN HRR-E-PM52 Manual preview
PRIME DESIGN HRR-E-PM52
Brand: Safe Fleet Pages: 12
Axxess AXDSPX-TY3 Installation Instructions Manual preview
AXDSPX-TY3
Brand: Axxess Pages: 16
FEATHERLITE TRAILERS COACH TRAILERS Owner'S Manual preview
COACH TRAILERS
Brand: FEATHERLITE TRAILERS Pages: 60

Brands by name

Popular brands

Load more brands