Ford Mustang 2010 Owner'S Manual Download

Page: 262 / 314

Working with the engine on

•

Automatic transmission:

1. Set the parking brake and shift to P (Park).

2. Block the wheels.

•

Manual transmission:

1. Set the parking brake, press and hold the clutch pedal, place the
gearshift in N (Neutral), and release the clutch pedal.

2. Block the wheels.

WARNING:

To reduce the risk of vehicle damage and/or

personal burn injuries, do not start your engine with the air

cleaner removed and do not remove it while the engine is running.

OPENING THE HOOD

1. Inside the vehicle, pull the hood
release handle located on the
driver’s side kick panel.

2. Go to the front of the vehicle and release the auxiliary latch that is
located under the front center of
the hood.

3. Lift the hood and secure it with
the prop rod.

Maintenance and Specifications

262

2010 05+ Mustang

(197)

Owners Guide, 2nd Printing
USA

(fus)

Summary of Contents for Mustang 2010



























































































































































































































































































































Search results

Summary of Contents for Mustang 2010

Reviews:

Related manuals for Mustang 2010

Brands by name

Popular brands

Ford Mustang 2010, Owner'S Manual

Search results

Summary of Contents for Mustang 2010

Reviews:

Related manuals for Mustang 2010

Brands by name

Popular brands