Ford Mustang 2010 Owner'S Manual Download

Page: 279 / 314

FUEL FILTER

For fuel filter replacement, see your authorized dealer. Refer to

scheduled maintenance information

for the appropriate intervals for

changing the fuel filter.

Replace the fuel filter with an authorized Motorcraft

威

part. The

customer warranty may be void for any damage to the fuel system
if an authorized Motorcraft

威

fuel filter is not used.

WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELS

Important safety precautions

WARNING:

Do not overfill the fuel tank. The pressure in an

overfilled tank may cause leakage and lead to fuel spray and fire.

WARNING:

The fuel system may be under pressure. If you hear

a hissing sound near the fuel filler door (Easy Fuel™ “no cap”

fuel system), do not refuel until the sound stops. Otherwise, fuel may
spray out, which could cause serious personal injury.

WARNING:

Automotive fuels can cause serious injury or death

if misused or mishandled.

WARNING:

Gasoline may contain benzene, which is a

cancer-causing agent.

Observe the following guidelines when handling automotive fuel:

•

Extinguish all smoking materials
and any open flames before
refueling your vehicle.

•

Always turn off the vehicle before
refueling.

Maintenance and Specifications

279

2010 05+ Mustang

(197)

Owners Guide, 2nd Printing
USA

(fus)

Summary of Contents for Mustang 2010



























































































































































































































































































































Search results

Summary of Contents for Mustang 2010

Reviews:

Related manuals for Mustang 2010

Brands by name

Popular brands

Ford Mustang 2010, Owner'S Manual

Search results

Summary of Contents for Mustang 2010

Reviews:

Related manuals for Mustang 2010

Brands by name

Popular brands