Ford Mondeo 2007 Owner'S Handbook Manual Download Page 130

Page: 130 / 292

2. Push the seatback forwards.

Creating a level load floor

WARNING

Make sure the red indicator is
not showing when you engage

the seat in the catches.

CAUTION

Lower the head restraints.

E86612

1. Insert your fingers between the

seat cushion and seatback and
fold the seat cushion forwards.

2. Press the unlock buttons down

and hold them there.

3. Push the seatback forwards.

HEATED SEATS

CAUTION

Operating this function with the
engine off will drain the battery.

E70601

E71224

Note:

The settings are stored when

you switch off the ignition.

128

Seats

Summary of Contents for Mondeo 2007





































































































































































































































































































Search results

Summary of Contents for Mondeo 2007

Reviews:

Related manuals for Mondeo 2007

Brands by name

Popular brands

Ford Mondeo 2007, Owner'S Handbook Manual

Search results

Summary of Contents for Mondeo 2007

Reviews:

Related manuals for Mondeo 2007

Brands by name

Popular brands