Ford Mondeo 2007 Owner'S Handbook Manual Download Page 175

Page: 175 / 292

CARGO NETS

Luggage retention net

Installing the net

E87052

1. Push the ends of the upper bar

towards each other and insert
them into the retainers on the
roof. Push the bar forwards into
the narrow section of the
retainers.

E87053

2. Attach the net to the luggage

anchor points. See

Luggage

anchor points

(page 170).

E87054

3. Tighten the belts.

Removing the net

E87135

1. Release the belts.

2. Remove the net from the luggage

anchor points.

3. Remove the upper bars.

173

Load carrying

Summary of Contents for Mondeo 2007





































































































































































































































































































Search results

Summary of Contents for Mondeo 2007

Reviews:

Related manuals for Mondeo 2007

Brands by name

Popular brands

Ford Mondeo 2007, Owner'S Handbook Manual

Search results

Summary of Contents for Mondeo 2007

Reviews:

Related manuals for Mondeo 2007

Brands by name

Popular brands