FX1-32
EN
Copyright © 2015
P a g e
|
3
www.Ford-tools.com
4
SYMBOLS
The following symbols are used in this manual and/or on the machine:
Denotes risk of personal
injury or damage to the
tool.
Read manual before use
In accordance with
essential requirements of
the European directive(s)
"Class II - The machine is
double insulated; Earthing
wire is therefore not
necessary
Wear eye protection
Wear protective gloves ?
5
GENERAL POWER TOOL SAFETY WARNINGS
Attention !
Read all safety warnings and instructions. Failure to heed
warnings and follow instructions may result in electric shock, fire and/or
serious injury.
Keep safety warnings and instructions for future reference.
The term "power tool" in the safety warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
5.1
Working area
Keep working area clean and well lit
. Untidy and dark areas can lead to
accidents.
Do not operate power tools in potentially explosive surroundings, for
example, in the presence of inflammable liquids, gases or dust
.
Power
tools create sparks which may ignite the dust or fumes.
Keep children and bystanders at a distance when operating a power
tool
.
Distractions can cause you to lose control of it.
5.2
Electrical safety
Always check that the power supply corresponds to the voltage
on the rating plate.
Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use adapter plugs with earthed power tools.
Unmodified
plugs and matching outlets will reduce the risk of a lethal electric shock.
Avoid body contact with earthed surfaces such as pipes, radiators,
kitchen ranges and refrigerators.
There is an increased risk of a lethal
electric shock if your body is earthed.
Do not expose power tools to rain or wet conditions.
If water gets inside
a power tool, it will increase the risk of a lethal electric shock
.
Do not damage the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep the cord away from heat, oil, sharp
