From the Instrument Panel
E138633
With the transmission in park
(P), press the button on the
instrument panel.
Remote Control
E138630
Press the button twice within
three seconds.
Outside Control Button
Opening the Liftgate
1.
Unlock the liftgate with the remote
control or power door unlock control.
If an intelligent access key is within 1 m
of the liftgate, the liftgate unlocks
when you press the liftgate release
button.
E138632
2. Press the control button located in the
top of the liftgate pull-cup handle.
Note:
Allow the system to open the
liftgate. Manually pushing or pulling the
liftgate may turn on obstacle detection and
stop the power operation or reverse its
direction. Manually interfering with the
liftgate motion may also replicate a strut
failure.
Stopping the Liftgate Movement
Note:
Do not apply sudden excessive force
to the liftgate while it is in motion. This
could damage the power liftgate and its
components.
You can stop the liftgate movement by
doing any of the following:
•
Pressing the liftgate control button.
•
Pressing the liftgate button on the
remote control twice.
•
Pressing the liftgate button on the
instrument panel.
•
Moving your foot under and away from
the center rear bumper in a single-kick
motion.
*
*
This method only works for vehicles with
the hands-free liftgate feature.
Setting the Liftgate Open Height
1.
Open the liftgate.
2. Stop the liftgate movement by pressing
the control button on the liftgate when
it reaches the desired height.
Note:
Once the liftgate has stopped
moving, you can also manually move it to
the desired height.
3. Press and hold the liftgate control
button on the liftgate until you hear a
tone, indicating programming is
complete.
Note:
You can only use the liftgate control
button to program the height.
Note:
You cannot program the height if the
liftgate position is too low.
The new open liftgate height is recalled
when the power liftgate is opened. To
change the programmed height, repeat the
above procedure. Once you open the
power liftgate, you can manually move it
to a different height.
42
Endura (CDQ) New Zealand, enNZL, Edition date: 201712, First Printing
Liftgate
