MOVE THE LCD TO A CLEAN WORK
AREA, TO INSTALL THE PCB. WITH THE
LCD FACE DOWN, REMOVE FOUR T10
TORX FROM SIDES OF CASE.
GENTLY OPEN CASE, BE CAREFUL AS
THERE ARE RIBBON CABLES
CONNECTING THE TWO SIDES.
RELEASE THE LOCKING CLIP FROM THE
FLAT RIBBON CABLE USING YOUR
FINGER NAIL OR A PIC TOOL. DO NOT
DAMAGE THE RIBBON CABLE.
THE FOLLOWING IS INSTRUCTION FOR INSTALLATION OF THE
DAUGHTER BOARD INTO THE EDGE, FLEX, TAURUS, F-F150 AND
LINCOLN VEHICLES. IF YOUR FORD MONITOR DOES NOT MATCH
THESE DISASSEMBLY INSTRUCTIONS, PLEASE SKIP FORWARD IN THE
MANUAL TO THE NEXT SET OF MONITOR DAUGHTER BOARD
INSTALL INSTRUCTIONS. (ESCAPE, FUSION, FOCUS, AND C-MAX)
