USING FINGERNAIL OR PIC TOOL PULL
BACK THE BLACK LOCKING TABS OF THE
TOUCH LAYER RIBBON CABLE. REMOVE
THE RIBBON CABLE FROM CONNECTOR.
REMOVE TWO T10 TORX FROM THE
FACTORY PCB ON THE SIDE WITH THE
TOUCH RIBBON CONNECTOR.
ALIGN INTRAPHEX PROVIDED PCB TO
THE TWO HOLES AND REPLACE THE
TWO T10 TORX SECURING THE
INTRAPHEX PCB.
INSERT INTRAPHEX PROVIDED RIBBON
CABLE INTO THE FACTORY CONNECTOR
WHERE YOU REMOVED THE ORIGINAL
LCD RIBBON CABLE EARLIER. BE SURE
TO INSERT THE NEW CABLE DEEPLY AS
THERE ARE EXTRA GROUND PINS.
CLOSE LOCKING TAB.
