manualshive.com logo in svg

Ford 2016 ESCAPE, Owner'S Manual

The Ford 2016 ESCAPE Quick Reference Manual is a valuable resource for owners to understand and operate their vehicle effectively. Easily accessible for download, this manual provides a comprehensive understanding of the ESCAPE's features and functions, all available for free on manualshive.com.

Share
Download
background image

Removing the Head Restraint

1.

Pull the head restraint up until it
reaches its highest position.

2. Press and hold buttons C and D.
3. Pull the head restraint up.

Installing the Head Restraint

Align the steel stems into the guide sleeves
and push the head restraint down until it
locks.

Folding the Head Restraint

1.

Press and hold button E.

2. Pull it back up to reset.

Tilting Head Restraints

The front head restraints tilt for extra
comfort. To tilt the head restraint, do the
following:

E144727

1.

Adjust the seatback to an upright
driving or riding position.

2. Pivot the head restraint forward toward

your head to the desired position.

After the head restraint reaches the
forward-most tilt position, pivot it forward
again to release it to the rearward, un-tilted
position.

MANUAL SEATS

WARNING

Do not adjust the driver seat or
seatback when your vehicle is
moving.

Moving the Seat Backward and
Forward

E163870

WARNING

Rock the seat backward and forward
after releasing the lever to make sure
that it is fully engaged.

110

Escape/Kuga (TM2), enUSA, First Printing

Seats

Summary of Contents for 2016 ESCAPE










































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 ESCAPE

Kargo Master 40131 Installation Manual preview
40131
Brand: Kargo Master Pages: 5
Westin 23-3130 Instructions preview
23-3130
Brand: Westin Pages: 3
Tamiya KO PROPO RTF 2002 ESC Manual preview
KO PROPO RTF 2002 ESC
Brand: Tamiya Pages: 2
Lexus LX 470 Owner'S Manual preview
LX 470
Brand: Lexus Pages: 369
Mountain Top Sports Bar Installation Manual preview
Sports Bar
Brand: Mountain Top Pages: 12
Dometic Heki 2 Installation And Operating Manual preview
Heki 2
Brand: Dometic Pages: 158
Lit Lightz RGBW Rock Lights Setup Manual preview
RGBW Rock Lights
Brand: Lit Lightz Pages: 3
Fab Fours F2950 Installation Instructions Manual preview
F2950
Brand: Fab Fours Pages: 21
Scania Interlock 700 Series Instructions For Use Manual preview
Interlock 700 Series
Brand: Scania Pages: 82
TATA Motors Indigo LE Owner'S Manual & Service Book preview
Indigo LE
Brand: TATA Motors Pages: 151
Thule QUICKDRAW RACHET TIE-DOWNS 855 User Manual preview
QUICKDRAW RACHET TIE-DOWNS 855
Brand: Thule Pages: 3
Summit Racing SUM-G1083 Assembly & Use Instructions preview
SUM-G1083
Brand: Summit Racing Pages: 11
Ford 2000 F 350 Owner'S Manual preview
2000 F 350
Brand: Ford Pages: 256
Belkin F8J034 User Manual preview
F8J034
Brand: Belkin Pages: 30
Mitsubishi FTO Series Handbook preview
FTO Series
Brand: Mitsubishi Pages: 141
Phonocar 6/946 Instruction Manual preview
6/946
Brand: Phonocar Pages: 4
Honda 2005 Civic Owner'S Manual preview
2005 Civic
Brand: Honda Pages: 234
Prorack K129 Fitting Instructions Manual preview
K129
Brand: Prorack Pages: 13

Brands by name

Popular brands

Load more brands