manualshive.com logo in svg

Ford 2016 ESCAPE, Owner'S Manual

The Ford 2016 ESCAPE Quick Reference Manual is a valuable resource for owners to understand and operate their vehicle effectively. Easily accessible for download, this manual provides a comprehensive understanding of the ESCAPE's features and functions, all available for free on manualshive.com.

Share
Download
background image

DAYTIME RUNNING LAMPS

 (If

Equipped)

WARNING

The daytime running lamps system
does not activate the rear lamps and
may not provide adequate lighting

during low visibility driving conditions. Also,
the autolamps switch position may not
activate the headlamps in all low visibility
conditions, such as daytime fog. Make sure
the headlamps are switched to auto or on,
as appropriate, during all low visibility
conditions. Failure to do so may result in a
crash.

Type 1 - Conventional (Non-

Configurable)

The daytime running lamps turn on when:
1.

The ignition is switched to the on
position.

2. The transmission is not in park (P) for

vehicles with automatic transmissions
or the parking brake is released for
vehicles with manual transmissions.

3. The lighting control is in the off, parking

lamp or autolamps positions.

4. The headlamps are off.

Type 2 - Configurable

Switch the daytime running lamps on or
off using the information display controls.
See 

Information Displays

 (page 88).

The daytime running lamps turn on when:
1.

They are switched on in the information
display.  See 

Information Displays

(page 88).

2. The ignition is switched to the on

position.

3. The transmission is not in park (P) for

vehicles with automatic transmissions
or the parking brake is released for
vehicles with manual transmissions.

4. The lighting control is in the autolamps

position.

5. The headlamps are off.

The other lighting control switch positions
do not activate the daytime running lamps,
and you can use them to temporarily
override autolamp control.

When switched off in the information
display, the daytime running lamps are off
in all lighting control switch positions.

FRONT FOG LAMPS

E210814

Press the button to switch the fog lamps
on or off.

You can switch the fog lamps on when the
lighting control is in any position except
off.

76

Escape/Kuga (TM2), enUSA, First Printing

Lighting

Summary of Contents for 2016 ESCAPE










































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 ESCAPE

Eclipse AVN 2210p mkII Operation Manual preview
AVN 2210p mkII
Brand: Eclipse Pages: 6
Genesis Multiple G9F18 AU000 Quick Start Manual preview
Multiple G9F18 AU000
Brand: Genesis Pages: 3
GMC SIERRA 2002 Manual preview
SIERRA 2002
Brand: GMC Pages: 499
Kia Amanti Owner'S Manual preview
Amanti
Brand: Kia Pages: 290
Dacia 2014 Sandero Driver'S Handbook Manual preview
2014 Sandero
Brand: Dacia Pages: 238
Honda Pilot 2019 Owner'S Manual preview
Pilot 2019
Brand: Honda Pages: 85
Firestone Ride-Rite Air Helper Springs 2173 Installation Instructions preview
Ride-Rite Air Helper Springs 2173
Brand: Firestone Pages: 4
SAAS StreetLine Series Installation Instructions preview
StreetLine Series
Brand: SAAS Pages: 4
FALCON RIDGE HO-P500-FC04 Instructions For Installation And Care preview
HO-P500-FC04
Brand: FALCON RIDGE Pages: 8
Scosche 142HUD2 Manual preview
142HUD2
Brand: Scosche Pages: 8
Honda 2010 Pilot Technology Reference Manual preview
2010 Pilot
Brand: Honda Pages: 20
Kia 2009 Rio Series Owner'S Manual preview
2009 Rio Series
Brand: Kia Pages: 219
Edelbrock 29135 Installation Instructions preview
29135
Brand: Edelbrock Pages: 2
Mercedes-Benz 1989 560 SL Owner'S Manual preview
1989 560 SL
Brand: Mercedes-Benz Pages: 93
WABCO TEBS E Manual preview
TEBS E
Brand: WABCO Pages: 224
Brodit Getac T800 Quick Start Manual preview
Getac T800
Brand: Brodit Pages: 2
Saturn 2009 OUTLOOK Owner'S Manual preview
2009 OUTLOOK
Brand: Saturn Pages: 432
K&N Engineering Filtercharger 57-9004 Installation Manual preview
Filtercharger 57-9004
Brand: K&N Engineering Pages: 4

Brands by name

Popular brands

Load more brands