manualshive.com logo in svg

Ford 2016 ESCAPE, Owner'S Manual

Share
Download
Ford 2016 ESCAPE Owner'S Manual Download Page 151

2. If the sensors detect that your vehicle

is on a slope, the system will activate
automatically.

3. When you remove your foot from the

brake pedal, your vehicle will remain
on the slope without rolling away for
about two or three seconds. This hold
time will automatically be extended if
you are in the process of driving off.

4. Drive off in the normal manner. The

brakes will release automatically.

Switching the System On and Off

You can switch this feature on or off if your
vehicle is equipped with a manual
transmission and an information display.
See 

General Information

 (page 88).  The

system remembers the last setting when
you start your vehicle.

If your vehicle is not equipped with a
manual transmission and an information
display, you cannot turn the system on or
off. When you switch the ignition on, the
system automatically turns on.

148

Escape/Kuga (TM2), enUSA, First Printing

Brakes

Summary of Contents for 2016 ESCAPE










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands