Front seat head restraints
Rear seat center head restraint
Rear seat outboard head restraints
The head restraints consist of:
An energy absorbing head
restraint.
A
Two steel stems.
B
Guide sleeve adjust and unlock
button.
C
Guide sleeve unlock and remove
button.
D
Fold button (rear seat center
only)
E
Adjusting the Head Restraint
Adjust the head restraint so that the top
of it is level with the top of your head.
Raising the Head Restraint
Pull the head restraint up.
Lowering the Head Restraint
1.
Press and hold button C.
2. Push the head restraint down.
Removing the Head Restraint
1.
Pull the head restraint up until it
reaches its highest position.
2. Press and hold buttons C and D.
3. Pull the head restraint up.
Folding the Head Restraint
Note:
The rear seat center head restraint
may fold forward for improved visibility.
Note:
If your vehicle has a dog guard, make
sure the folding center head restraint is in
the upright position before installing the dog
guard. See
Load Carrying
(page 207).
1.
Press and hold button E.
2. Pull it back up to reset.
Installing the Head Restraint
Align the steel stems into the guide sleeves
and push the head restraint down until in
locks.
127
Mondeo (CNG) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 19-04-2015, CG3633en enGBR, Edition date: 10/2014, First Printing
Seats