You can stop the engine shutdown, or reset
the timer, at any point before the
30-second countdown has expired by
doing any of the following:
•
You can reset the timer by interacting
with your vehicle (such as pressing the
brake pedal or accelerator pedal).
•
You can temporarily switch off the
shutdown feature any time the ignition
is on (for the current ignition cycle
only). Use the information display to
do so. See
Information Displays
(page 83).
•
During the countdown before engine
shutdown, you are prompted to press
OK or RESET (depending on your type
of information display) to temporarily
switch the feature off (for the current
ignition cycle only).
Stopping the Engine When Your
Vehicle is Stationary
Vehicles with an Ignition Key
1.
Move the transmission selector lever
to position
P
(automatic transmission)
or
1
(manual transmission).
2. Turn the key to position
0
.
3. Apply the parking brake.
Vehicles with Keyless Start
1.
Move the transmission selector lever
to position
P
.
2. Press the button once.
3. Apply the parking brake.
Note:
This switches off the ignition, all
electrical circuits, warning lamps and
indicators.
Note:
If the engine is idling for 30 minutes,
the ignition and engine automatically shut
down.
Stopping the Engine When Your
Vehicle is Moving
WARNING
Switching off the engine when the
vehicle is still moving will result in a
loss of brake and steering assistance.
The steering will not lock, but higher effort
will be required. When the ignition is
switched off, some electrical circuits,
warning lamps and indicators may also be
off.
Vehicles with an Ignition Key
1.
Move the transmission selector lever
to position
N
(automatic transmission)
or neutral (manual transmission) and
use the brakes to bring your vehicle to
a safe stop.
2. When your vehicle has stopped, move
the transmission selector lever to
position
P
(automatic transmission)
or
1
(manual transmission) and turn
the key to position
0
.
3. Apply the parking brake.
Vehicles with Keyless Start
1.
Move the transmission selector lever
to position
N
and use the brakes to
bring your vehicle to a safe stop.
2. When your vehicle has stopped, move
the transmission selector lever to
position
P
.
3. Press and hold the button for one
second, or press it three times within
two seconds.
4. Apply the parking brake.
147
Fusion/Mondeo (CC7)
Starting and Stopping the Engine