PRINCIPLE OF OPERATION
Cruise control lets you maintain a set
speed without keeping your foot on the
accelerator pedal.
USING CRUISE CONTROL
WARNINGS
Do not use cruise control in heavy
traffic, on winding roads or when the
road surface is slippery.
When you are going downhill, your
speed may increase above the set
speed. The system will not apply the
brakes. Change down a gear to assist the
system in maintaining the set speed.
Note:
Cruise control will disengage if the
vehicle speed decreases more than 10 mph
(16 km/h) below your set speed while
driving uphill.
E144500
The cruise controls are located on the
steering wheel.
Switching Cruise Control On
Press and release
ON
.
E71340
The indicator will appear in the
instrument cluster.
Setting a Speed
1.
Accelerate to the desired speed.
2. Press and release
SET+
.
3. Take your foot off the accelerator
pedal.
The indicator will change colors in the
instrument cluster.
Changing the Set Speed
Note:
If you accelerate by pressing the
accelerator pedal, the set speed will not
change. When you release the accelerator
pedal, you will return to the speed that you
previously set.
•
Press and hold
SET+
or
SET-
. Release
the control when you reach the desired
speed.
•
Press and release
SET+
or
SET-
. The
set speed will change in approximately
1 mph (2 km/h) increments.
•
Press the accelerator or brake pedal
until you reach the desired speed. Press
and release
SET+
.
Canceling the Set Speed
Press
CNCL
or tap the brake pedal. You
will not erase the set speed.
Resuming the Set Speed
Press and release
RES
.
Switching Cruise Control Off
Note:
You will erase the set speed if you
switch the system off.
Press and release
OFF
or switch the
ignition off.
186
Fusion/Mondeo (CC7)
Cruise Control