TURN SIGNAL CONTROL
The turn signal lever does not mechanically lock in the upward or
downward position when activated. The turn signal control activation and
cancellation is electronic.
•
To operate the left turn signal,
push the lever down until it stops
and release.
•
To operate the right turn signal,
push the lever up until it stops
and release.
•
To manually cancel turn signal operation, push the lever again in
either direction.
Lane change
To indicate a left or right lane change:
•
Push the lever up/down to the first stop position and release. The turn
signals will flash three times and stop.
•
Push the lever up/down to the first stop position and hold. The turn
signals will flash for as long as the lever is held in this position.
INTERIOR LAMPS
Front map lamps (if equipped)
The map lamps are located on the overhead console. Press the controls
on either side of each map lamp to turn on the lamps. The map lamps
also light when:
•
any door is opened,
•
the instrument panel dimmer
switch is rotated up until the
courtesy lamps come on, and
•
any of the remote entry controls
are pressed and the ignition is
off.
Lights
93
2012 F-250/350/450/550
(f23)
Owners Guide, 1st Printing
USA
(fus)