manualshive.com logo in svg

Ford 2012 F-250 Super Duty, Owner'S Manual

Download the free user manual for the Ford 2012 F-250 Super Duty and uncover the full potential of this powerful truck. Whether you need assistance with maintenance or want to explore its advanced features, our comprehensive manual is just a click away. Get it now from manualshive.com and unlock the true capabilities of your Ford F-250.

Share
Download
background image

Transmission operation while plowing

Operate the vehicle with the automatic transmission gearshift lever in
the D (Overdrive) position and tow/haul off.

•

Shift transfer case to 4L (4x4 Low) when plowing in small areas at
speeds below 5 mph (8 km/h).

•

Shift transfer case to 4H (4x4 High) when plowing larger areas or light
snow at higher speeds. Do not exceed 15 mph (24 km/h).

•

Do not shift the transmission from a forward gear to R (Reverse) until
the engine is at idle and the wheels are stopped.

•

If the vehicle is stuck, shift the transmission in a steady motion
between forward and reverse gears. Do not rock the vehicle for more
than a few minutes. The transmission and tires may be damaged or
the engine can overheat.

Do not rock the vehicle if the engine is not at normal operating
temperature. Do not rock the vehicle for more than a minute. The
transmission and tires may be damaged or the engine may
overheat.

Refer to

Gauges

in the

Instrument Cluster

chapter for transmission

fluid temperature information.

WARNING:

Do not spin the wheels at over 35 mph (55 km/h).

The tires may fail and injure a passenger or bystander.

Driving

321

2012 F-250/350/450/550

(f23)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2012 F-250 Super Duty







































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 F-250 Super Duty

VEAP SHIELD UNITED FT Series Mounting Instruction preview
FT Series
Brand: VEAP SHIELD UNITED Pages: 3
Renault 2016 Sandero Stepway Handbook preview
2016 Sandero Stepway
Brand: Renault Pages: 183
Ranger design 1506-PHX Cargo Plus Installation Manual preview
1506-PHX Cargo Plus
Brand: Ranger design Pages: 8
AUTOTECH 10.411.01.219K Installation Instructions preview
10.411.01.219K
Brand: AUTOTECH Pages: 1
Jaeger 21360508 Fitting Instructions Manual preview
21360508
Brand: Jaeger Pages: 13
THIEYE CarView 2 User Manual preview
CarView 2
Brand: THIEYE Pages: 88
Ford ALCON 1968 Owner'S Manual preview
ALCON 1968
Brand: Ford Pages: 52
true-i HMBS-200 User Manual preview
HMBS-200
Brand: true-i Pages: 11
Phonocar VM 320 Instruction Manual preview
VM 320
Brand: Phonocar Pages: 28
Ranger design 1525-PCX Installation Manual preview
1525-PCX
Brand: Ranger design Pages: 22
Axxess AXGMLN-09 Installation Instructions preview
AXGMLN-09
Brand: Axxess Pages: 4
PAC RP4-CH11 Instruction Manual preview
RP4-CH11
Brand: PAC Pages: 7
Active Controls ActiveStart ACS30P Installation, Operation & Application Manual preview
ActiveStart ACS30P
Brand: Active Controls Pages: 2
Honda 2013 Accord Coupe EX Technology Reference Manual preview
2013 Accord Coupe EX
Brand: Honda Pages: 20
Whispbar K144W Fitting Instructions Manual preview
K144W
Brand: Whispbar Pages: 78
Sony Ericsson HCA-60 User Manual preview
HCA-60
Brand: Sony Ericsson Pages: 116
Jeep 2002 WG Grand Cherokee Service Manual preview
2002 WG Grand Cherokee
Brand: Jeep Pages: 10
Jeep 2005 Grand Cherokee Owner'S Manual preview
2005 Grand Cherokee
Brand: Jeep Pages: 408

Brands by name

Popular brands

Load more brands