manualshive.com logo in svg

Ford 2012 F-250 Super Duty, Owner'S Manual

Download the free user manual for the Ford 2012 F-250 Super Duty and uncover the full potential of this powerful truck. Whether you need assistance with maintenance or want to explore its advanced features, our comprehensive manual is just a click away. Get it now from manualshive.com and unlock the true capabilities of your Ford F-250.

Share
Download
background image

If you use a rental trailer, follow the instructions that the rental agency
gives to you.

Do not attach safety chains to the bumper.

Trailer brakes

Electric brakes and manual, automatic or surge-type trailer brakes are
safe if installed properly and adjusted to the manufacturer’s
specifications. The trailer brakes must meet local and Federal
regulations.

WARNING:

If you own a trailer with a hydraulic brake system,

do not connect the trailer’s hydraulic brake system directly to

your vehicle’s brake system. The vehicle’s brake system is only
designed to carry the appropriate amount of brake fluid for the vehicle
alone. Connecting a hydraulic trailer braking system could adversely
affect your vehicle’s braking performance, which could result in loss of
vehicle control, crash or serious injury.

The braking system of the tow vehicle is rated for operation at the
GVWR not GCWR.

Integrated trailer brake controller (if equipped)

Your vehicle may be equipped with a fully integrated electronic trailer
brake controller (TBC). When used properly, the TBC helps ensure
smooth and effective trailer braking by powering the trailer’s electric
brakes with a proportional output based on the towing vehicle’s brake
pressure.

The Ford TBC has been tested to be compatible with several major
brands of electric-over-hydraulic trailer brakes; contact your authorized
dealer for information on which brands can be used.

WARNING:

The Ford TBC has been verified to be compatible

with trailers having electric-actuated drum brakes (one to four

axles) and some electric-over-hydraulic types, but not hydraulic surge
types. It is the responsibility of the customer to ensure that the trailer
brakes are adjusted appropriately, functioning normally and all electric
connections are properly made. Failure to do so may result in loss of
vehicle control, crash or serious injury.

Tires, Wheels and Loading

260

2012 F-250/350/450/550

(f23)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2012 F-250 Super Duty







































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 F-250 Super Duty

Chevrolet 2013 Spark Owner'S Manual preview
2013 Spark
Brand: Chevrolet Pages: 356
Ford Zephyr 2007 Owner'S Manual preview
Zephyr 2007
Brand: Ford Pages: 272
Pontiac 2004 Sunfire Owner'S Manual preview
2004 Sunfire
Brand: Pontiac Pages: 376
Jeep COMPASS 2018 Owner'S Manual preview
COMPASS 2018
Brand: Jeep Pages: 712
Honda 2004 S2000 Owner'S Manual preview
2004 S2000
Brand: Honda Pages: 208
Volkswagen 1973 Convertible Owner'S Manual preview
1973 Convertible
Brand: Volkswagen Pages: 80
Hudson 1933 Eight Owner'S Manual preview
1933 Eight
Brand: Hudson Pages: 34
Daesung HM-TX-315 User Manual preview
HM-TX-315
Brand: Daesung Pages: 9
Pontiac 2010 Vibe Owner'S Manual preview
2010 Vibe
Brand: Pontiac Pages: 318
Thetford SANICON TURBO 300 Operating Instructions Manual preview
SANICON TURBO 300
Brand: Thetford Pages: 25
travall TDG 1486 Fitting Instructions preview
TDG 1486
Brand: travall Pages: 4
Prorack K663 Fitting Instructions Manual preview
K663
Brand: Prorack Pages: 15
BMW 84 61 0 028 926 Installation Instructions Manual preview
84 61 0 028 926
Brand: BMW Pages: 13
Roadtrek SS Agile 2017 Owner'S Manual preview
SS Agile 2017
Brand: Roadtrek Pages: 61
TOGU Airgo Active cushion / Comfort Manual And Maintenance Instructions preview
Airgo Active cushion / Comfort
Brand: TOGU Pages: 2
BrandMotion 212IFD001N User Manual preview
212IFD001N
Brand: BrandMotion Pages: 12
Connects2 PARK-401 User Manual preview
PARK-401
Brand: Connects2 Pages: 2
Uniden BTSC1100 Owner'S Manual preview
BTSC1100
Brand: Uniden Pages: 16

Brands by name

Popular brands

Load more brands