Ford 2012 F-250 Super Duty Owner'S Manual Download Page 78

Page: 78 / 454

Radio Display

Condition

Action Required

INVALID CHNL

Channel no longer

available.

This previously

available channel is no

longer available. Tune

to another channel. If

the channel was one of

your presets, you may

choose another channel

for that preset button.

UNSUBSCRIBED

Subscription not
available for this

channel.

Contact SIRIUS

威

1–888–539–7474 to

subscribe to the

channel or tune to

another channel.

NO TEXT

Artist information not

available.

Artist information not

available at this time on

this channel. The

system is working

properly.

NO TEXT

Song title information

not available.

Song title information

not available at this

time on this channel.

The system is working

properly.

NO TEXT

Category information

not available.

Category information

not available at this

time on this channel.

The system is working

properly.

NO SIGNAL

Loss of signal from

the SIRIUS

威

satellite

or SIRIUS

威

tower to

the vehicle antenna.

You are in a location

that is blocking the

SIRIUS

威

signal (i.e.,

tunnel, under an

overpass, dense foliage,

etc.) The system is

working properly. When

you move into an open

area, the signal should

return.

Entertainment Systems

2012 F-250/350/450/550

(f23)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2012 F-250 Super Duty







































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 F-250 Super Duty

Reviews:

Ford 2012 F-250 Super Duty, Owner'S Manual, Page: 78 / 454

Search results

Summary of Contents for 2012 F-250 Super Duty

Reviews: