manualshive.com logo in svg

Ford 2011 Mustang, Owner'S Manual

The Ford 2011 Mustang Instructions Manual is a comprehensive guide that offers detailed information on operating and maintaining your Mustang model. Our website provides a hassle-free experience to download this manual for free, allowing you to enhance your Mustang experience. Download it now from manualshive.com.

Share
Download
background image

N (Neutral)

With the gearshift lever in N (Neutral), the vehicle can be started and is
free to roll. Hold the brake pedal down while in this position.

D (Drive) standard mode

The normal driving position for the best fuel economy. Transmission
operates in gears one through six.

D (Drive) with grade assist

Press the transmission control
switch on the side of the shift
handle to activate grade assist.

•

This position allows for all
forward gears and provides
increased engine braking.

•

Grade assist lamp is illuminated.

•

Use with driving conditions such
as hilly terrain, heavy loads,
trailer towing and when engine
braking is required.

•

To return to standard mode, press the transmission control switch.
The grade assist lamp will not be illuminated.

•

Standard mode is automatically returned each time the key is turned
off.

3 (Third)

This position allows for third gear only.

•

Provides engine braking.

•

To return to D (Drive), move the transmission shift lever into the D
(Drive) position.

•

Selecting 3 (Third) at higher speeds will cause the transmission to
downshift to third gear at the appropriate vehicle speed.

Driving

217

2011 05+ Mustang

(197)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2011 Mustang





























































































































































































































































































































































Reviews:

No comments

Related manuals for 2011 Mustang

Abarth 595 Owner'S Handbook Manual preview
595
Brand: Abarth Pages: 176
Alfa Romeo FIX&GO automatic Manual preview
FIX&GO automatic
Brand: Alfa Romeo Pages: 40
Globalsat MR-350P Installation Manual preview
MR-350P
Brand: Globalsat Pages: 2
Alfa Romeo Alfa 147 Quick Start Manual preview
Alfa 147
Brand: Alfa Romeo Pages: 8
Quadratec 12057.0261 Installation Manual preview
12057.0261
Brand: Quadratec Pages: 12
Buick 2015 LaCrosse Getting To Know Manual preview
2015 LaCrosse
Brand: Buick Pages: 20
Flash Cover MN019 Instructions preview
MN019
Brand: Flash Cover Pages: 2
Porsche WTY 2010 Warranty & Maintenance Manual preview
WTY 2010
Brand: Porsche Pages: 98
ULTIMATE SPEED UAWSO 2 B1 Operation And Safety Notes preview
UAWSO 2 B1
Brand: ULTIMATE SPEED Pages: 32
Chevrolet 1998 Tahoe Manual preview
1998 Tahoe
Brand: Chevrolet Pages: 441
PEUGEOT 108 2017 Vehicle Instruction Card preview
108 2017
Brand: PEUGEOT Pages: 17
Honda 1991 Civic Online Reference Owner'S Manual preview
1991 Civic
Brand: Honda Pages: 124
Ford ALCON 1968 Owner'S Manual preview
ALCON 1968
Brand: Ford Pages: 52
Kia OPTIA hybrid 2020 Features & Functions Manual preview
OPTIA hybrid 2020
Brand: Kia Pages: 54
HAKR TRIP 3 Instructions For Use Manual preview
TRIP 3
Brand: HAKR Pages: 9
Westin 32-2250 Instructions preview
32-2250
Brand: Westin Pages: 3
Lund Tonno Pro Installation Instructions Manual preview
Tonno Pro
Brand: Lund Pages: 12
Subaru S0A367010 Installation Instructions preview
S0A367010
Brand: Subaru Pages: 2

Brands by name

Popular brands

Load more brands