Ford 2011 Mustang Page 261 Owner'S Manual Download | Manualshive

Page: 261 / 348

background image

If your vehicle must be serviced while you are traveling or living in
Asia-Pacific Region, Sub-Saharan Africa, U.S. Virgin Islands, Central
America, the Caribbean, and Israel, contact the nearest authorized
dealer. If the authorized dealer cannot help you, contact:

FORD MOTOR COMPANY
FORD EXPORT OPERATIONS
1555 Fairlane Drive
Fairlane Business Park #3
Allen Park, Michigan 48101
U.S.A.
Telephone: (313) 594-4857
FAX: (313) 390-0804
Email: [email protected]

If your vehicle must be serviced while you are traveling or living in
Puerto Rico, contact the nearest authorized dealer. If the authorized
dealer cannot help you, contact:

Ford International Business Development Inc.
Customer Assistance Center
P.O. Box 11957
Caparra Heights Station
San Juan, Puerto Rico 00922-1957
Telephone: (800) 841-FORD (3673)
FAX: (313) 390-0804
Email: [email protected]

If your vehicle must be serviced while you are traveling or living in the
Middle East, contact the nearest authorized dealer. If the authorized
dealer cannot help you, contact:

Ford Middle East
Customer Relationship Center
P.O. Box 21470
Dubai, United Arab Emirates
Telephone: +971 4 3326084
FAX: +971 4 3327299
Email: [email protected]
www.me.ford.com

If you buy your vehicle in North America and then relocate to any of the
above locations, register your vehicle identification number (VIN) and
new address with Ford Motor Company Export Operations.

If you are in another foreign country, contact the nearest authorized
dealer. If the authorized dealer employees cannot help you, they can
direct you to the nearest Ford affiliate office.

Customer Assistance

261

2011 05+ Mustang

(197)

Owners Guide, 1st Printing
USA

(fus)

«
...
259
260
261
262
263
...
»

Summary of Contents for 2011 Mustang





























































































































































































































































































































































Reviews:

No comments

Related manuals for 2011 Mustang

Brand: DAVIS Pages: 32

Brand: DEFA Pages: 7

Brand: Prorack Pages: 15

Brand: Yakima Pages: 13

Brand: Menabo Pages: 11

Chevrolet Silverado 2500HD 2021

Brand: GMC Pages: 433

Brand: Honda Pages: 85

Brand: Flash Cover Pages: 2

Brand: Mercedes-Benz Pages: 358

Brand: travall Pages: 2

Brand: Gacell Pages: 12

Speed & Route Profiler

Brand: Racelogic Pages: 24

Brand: Prorack Pages: 15

Brand: Menabo Pages: 8

C-Max Energi 2014

Brand: Ford Pages: 10

Brand: SuperATV Pages: 2

Brand: Metra Electronics Pages: 16

Brand: Genesis Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands