Ford 2011 Edge Page 239 Owner'S Manual Download | Manualshive

Page: 239 / 403

background image

For load specification terms found on the label, refer to

Vehicle loading

– with and without a trailer

in this chapter. Remember to figure in the

tongue load of your loaded vehicle when figuring the total weight.

Powertrain

Maximum GCWR - lb

(kg)

Maximum Trailer

Weight - lb (kg)

FWD 3.5L Class I

6710 (3044)

2000 (907)

FWD 3.7L Class I

6780 (3076)

2000 (907)

AWD 3.5L Class I

6900 (3131)

2000 (907)

AWD 3.7L Class I

6960 (3158)

2000 (907)

FWD 3.5L Class II

8210 (3725)

3500 (1588)

AWD 3.5L Class II

8400 (3811)

3500 (1588)

WARNING:

Do not exceed the GVWR or the GAWR specified on

the certification label.

WARNING:

Towing trailers beyond the maximum recommended

gross trailer weight exceeds the limit of the vehicle and could

result in engine damage, transmission damage, structural damage, loss
of vehicle control, vehicle rollover and personal injury.

Preparing to tow

Use the proper equipment for towing a trailer and make sure it is
properly attached to your vehicle. Contact your authorized dealer or a
reliable trailer dealer as soon as possible if you require assistance.

Trailer tow connector (vehicles equipped with a Class II trailer
tow/prep package)

The trailer tow connector is located under the rear bumper, on the
driver’s side of the vehicle.

Refer to the following chart for information regarding the
factory-equipped trailer tow connector:

Color

Function

1. Dark Green

Right turn signal/brake lamp/hazard flasher

2. Yellow

Left turn signal/brake lamp/hazard flasher

3. Brown

Tail lamps/parking lamps

4. White

Ground

Tires, Wheels and Loading

239

2011 Edge

(edg)

Owners Guide, 1st Printing
USA

(fus)

«
...
237
238
239
240
241
...
»

Summary of Contents for 2011 Edge




















































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2011 Edge

Brand: cam Pages: 2

Brand: Dapper Lighting Pages: 2

Brand: RaceChip Pages: 20

Brand: Horn Tools Pages: 6

Brand: PAC Pages: 4

Brand: Kia Pages: 51

Brand: E&G Classics Pages: 2

Brand: Mercedes-Benz Pages: 91

Brand: ULTIMATE SPEED Pages: 34

Brand: Prorack Pages: 15

Brand: Renault Pages: 198

Brand: Connects2 Pages: 2

Brand: INNO Pages: 3

Electronic Parking Disc 3

Brand: Jacob Jensen Pages: 17

Brand: Macally Pages: 10

Brand: FAAFTECH Pages: 2

Brand: Volvo Pages: 5

Brand: Prime Design Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands