Ford 2011 Edge Page 26 Owner'S Manual Download

Page: 26 / 403

CHECK CHARGING SYSTEM

— Displayed when the charging system

needs servicing. If the warning stays on or continues to come on, contact
your authorized dealer as soon as possible.

SHIFT TO PARK

— Displayed when the start/stop button is pressed to

shut off the engine with the shift select lever in any position other than
P (Park). Refer to

Fast restart feature

Push button start system

the

Driving

chapter for more information.

LOW ENGINE OIL PRESSURE

— Stop the vehicle as soon as safely

possible, turn off the engine. Check the oil level. See

Checking the

engine oil

in the

Maintenance and Specifications

chapter. If the

warning stays on or continues to come on, contact your authorized
dealer as soon as possible.

CHANGE ENGINE OIL SOON

— Displayed when the engine oil life

remaining is 10% or less.

OIL CHANGE REQUIRED

— Displayed when the oil life left reaches

0%.

ENGINE COOLANT OVER TEMP

— Displayed when the engine

coolant temperature is excessively high.

WASHER FLUID LEVEL LOW

— Indicates the washer fluid reservoir

is less than one quarter full. Check the washer fluid level. Refer to

Windshield washer fluid

in the

Maintenance and Specifications

chapter.

LOW TIRE PRESSURE

— Displayed when one or more tires on your

vehicle have low tire pressure. Refer to

Inflating Your Tires

in the

Tires, Wheels and Loading

chapter.

TIRE PRESSURE MONITOR FAULT

— Displayed when the Tire

Pressure Monitoring System is malfunctioning. If the warning stays on or
continues to come on, have the system inspected by your authorized
dealer.

TIRE PRESSURE SENSOR FAULT

— Displayed when a tire pressure

sensor is malfunctioning, or your spare tire is in use. For more
information on how the system operates under these conditions, refer to

Understanding Your Tire Pressure Monitoring System (TPMS)

in the

Tires, Wheels and Loading

chapter. If the warning stays on or

continues to come on, contact your authorized dealer as soon as
possible.

BUCKLE UP TO UNMUTE AUDIO

— Displayed when a MyKey™ is in

use and Belt-Minder

威

is activated. Refer to

MyKey™

in the

Locks and

Security

chapter for more information.

Instrument Cluster

2011 Edge

(edg)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2011 Edge




















































































































































































































































































































































































































Search results

Summary of Contents for 2011 Edge

Reviews:

Related manuals for 2011 Edge

Brands by name

Popular brands

Ford 2011 Edge, Owner'S Manual

Search results

Summary of Contents for 2011 Edge

Reviews:

Related manuals for 2011 Edge

Brands by name

Popular brands