Ford 2011 Edge Page 117 Owner'S Manual Download

Page: 117 / 403

CARGO AREA FEATURES

Cargo management system (if equipped)

The cargo management system
consists of storage compartments
located in the floor of the rear cargo
area.

1. To open, lift the release handle
and the lid.

2. To close, lower the lid.

Cargo net (if equipped)

The cargo net secures lightweight
objects in the cargo area. Attach the
net to the loops and anchors
provided.

WARNING:

This net is not

designed to restrain objects

during a collision.

Driver Controls

117

2011 Edge

(edg)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2011 Edge




















































































































































































































































































































































































































Search results

Summary of Contents for 2011 Edge

Reviews:

Related manuals for 2011 Edge

Brands by name

Popular brands

Ford 2011 Edge, Owner'S Manual

Search results

Summary of Contents for 2011 Edge

Reviews:

Related manuals for 2011 Edge

Brands by name

Popular brands