Ford 2011 Crown Victoria Owner'S Manual Download Page 263

Page: 263 / 333

•

Check tire pressures and set tire inflation per the Tire Label.

•

Check brake pedal operation. Drive the vehicle 15 ft (4.5 meters) back
and forth to remove rust build-up.

•

Check fluid levels (including coolant, oil and gas) to make sure there
are no leaks, and fluids are at recommended levels.

•

If the battery was removed, clean the battery cable ends and inspect.

If you have any concerns or issues, contact your authorized dealer.

MOTORCRAFT PART NUMBERS

Component

4.6L V8 engine

Air filter element

FA-1783

Fuel filter

FG-1114

Battery-standard

BXT-65–650

Battery-heavy duty

BXT-65–750

Oil filter

FL-820-S

Oil filter (with oil cooler )

FL-910

Spark plugs

For spark plug replacement, see your authorized dealer. Refer to

scheduled maintenance information

for the appropriate intervals for

changing the spark plugs.

Replace the spark plugs with ones that meet Ford material and
design specifications for your vehicle, such as Motorcraft

威

equivalent replacement parts. The customer warranty may be
void for any damage to the engine if such spark plugs are not
used.

Maintenance and Specifications

263

2011 Crown Victoria

(cro)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for 2011 Crown Victoria














































































































































































































































































































































Search results

Summary of Contents for 2011 Crown Victoria

Reviews:

Related manuals for 2011 Crown Victoria

Brands by name

Popular brands

Ford 2011 Crown Victoria, Owner'S Manual

Search results

Summary of Contents for 2011 Crown Victoria

Reviews:

Related manuals for 2011 Crown Victoria

Brands by name

Popular brands