Ford 2010 MKZ Page 24 Owner'S Manual Download

Page: 24 / 317

Blind spot system (if equipped)

The blind spot information system is designed to assist the driver by
monitoring the side areas on both sides of the vehicle.

1. Select this function from the
SETUP menu to disable the system.

2. Press RESET to turn blind spot
off or on.

Cross traffic alert system (if equipped)

The cross traffic alert system is designed to assist the driver by
monitoring the areas toward the rear of the vehicle.

1. Select this function from the
SETUP menu to disable/enable the
system.

2. Press RESET to cross traffic off
or on.

Easy entry/exit seat

This feature automatically moves the drivers seat backwards for easy exit
from the vehicle.

1. To disable/enable the easy exit
seat feature, select this function
from the SETUP control for the
current display mode.

2. Press the RESET control to turn
the easy entry exit seat ON or OFF.

Rear park aid (Reverse sensing system) (if equipped)

This feature sounds a warning tone to warn the driver of obstacles near
the rear bumper, and functions only when R (Reverse) gear is selected.

1. Select this function from the
SETUP menu to disable the reverse
sensing system feature.

2. Press the RESET control to turn
the rear park assist off. When R
(Reverse) gear is selected, PARK AID OFF will be displayed.

Instrument Cluster

2010 MKZ

(378)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for 2010 MKZ






























































































































































































































































































































Search results

Summary of Contents for 2010 MKZ

Reviews:

Related manuals for 2010 MKZ

Brands by name

Popular brands

Ford 2010 MKZ, Owner'S Manual

Search results

Summary of Contents for 2010 MKZ

Reviews:

Related manuals for 2010 MKZ

Brands by name

Popular brands