Ford 2010 MKZ Page 113 Owner'S Manual Download

Page: 113 / 317

The control is located on the outboard side of the seat cushion.

Move the switch in the direction of
the arrows to raise or lower the
front portion of the seat cushion.

Move the switch in the direction of
the arrows to raise or lower the rear
portion of the seat cushion.

Press the switch in the direction of
the arrows to move the seat
forward, backward, up or down.

Power recline

Press the control to recline the
seatback forward or rearward.

Seating and Safety Restraints

113

2010 MKZ

(378)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for 2010 MKZ






























































































































































































































































































































Search results

Summary of Contents for 2010 MKZ

Reviews:

Related manuals for 2010 MKZ

Brands by name

Popular brands

Ford 2010 MKZ, Owner'S Manual

Search results

Summary of Contents for 2010 MKZ

Reviews:

Related manuals for 2010 MKZ

Brands by name

Popular brands