Ford 2010 MKZ Owner'S Manual Download

Page: 234 / 317

Standard fuse amperage rating and color

COLOR

Fuse

rating

Mini

fuses

Standard

fuses

Maxi

fuses

Cartridge

maxi

fuses

Fuse link

cartridge

Grey

—

Violet

—

Pink

—

Tan

—

7.5A

Brown

—

10A

Red

—

15A

Blue

—

20A

Yellow

Blue

25A

Natural

—

30A

Green

Pink

40A

—

Orange

Green

50A

—

Red

60A

—

Blue

Yellow

70A

—

Tan

—

Brown

80A

—

Natural

Black

Passenger compartment fuse panel

The fuse panel is located below and to the left of the steering wheel by
the brake pedal. Remove the panel cover to access the fuses.

To remove a fuse use the fuse puller tool provided on the fuse panel
cover.

Roadside Emergencies

234

2010 MKZ

(378)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for 2010 MKZ






























































































































































































































































































































Search results

Summary of Contents for 2010 MKZ

Reviews:

Related manuals for 2010 MKZ

Brands by name

Popular brands

Ford 2010 MKZ, Owner'S Manual

Search results

Summary of Contents for 2010 MKZ

Reviews:

Related manuals for 2010 MKZ

Brands by name

Popular brands