Black plate (215,1)
7. Swing the retaining spring out and
away to free the bulb.
8. Carefully remove the bulb from the
socket by pulling it straight back.
9. Install the new bulb in the reverse order
of removal.
NOTE
l
To replace the bulb, contact an
expert repairer, we recommend an
Authorised Ford Repairer.
l
If the halogen bulb is accidentally
touched, it should be cleaned with
rubbing alcohol before being used.
l
Use the protective cover and carton
for the replacement bulb to dispose
of the old bulb promptly and out of
the reach of children.
Fog lights
í
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Check the fog light position from
below the bumper.
3. Disconnect the socket from the
electrical connector by pressing the tab
on the connector with your finger.
4. Turn the bulb anticlockwise and
remove it. Carefully remove the fog
light bulb from its socket by pulling it
straight back.
5. Install the new socket and bulb
assembly in the reverse order of
removal.
NOTE
l
To replace the bulb, contact an
expert repairer, we recommend an
Authorised Ford Repairer.
l
If the halogen bulb is accidentally
touched, it should be cleaned with
rubbing alcohol before being used.
l
Use the protective cover and carton
for the replacement bulb to dispose
of the old bulb promptly and out of
the reach of children.
Maintenance and Care
Owner Maintenance
8-29
í
Some models.
RANGER_F8M1-10-08I_Edition1 Page215
Friday, September 26 2008 3:7 PM
Form No.F8M1-10-08I
