Ford 2000 E-150, Owner'S Manual

Page: 202 / 232

Fluid Ford Part
Name Application Capacity
Transmission
fluid
6
Motorcraft
MERCON
t
V
ATF
Automatic
(4R70W) 13.1L
(13.9 quarts)
7
Motorcraft
MERCON
t
ATF
Automatic
(4R100 except
E-Super Duty) 15.0L
(15.9 quarts)
7
Automatic
(4R100 E-Super
Duty) 15.5L
(16.4 quarts)
7
Windshield
washer fluid Ultra-Clear
Windshield
Washer
Concentrate All 4.0L
(4.2 quarts)
1
Use Ford Premium Engine Coolant (green in color). DO NOT USE Ford
Extended Life Engine Coolant (orange in color). Refer to
Adding engine
coolant, in the Maintenance and Care chapter.
2
If your vehicle’s rear axle is filled with a synthetic rear axle lubricant it
is considered lubricated for life. These lubricants do not need to be
checked or changed unless a leak is suspected, service is required or the
axle assembly has been submerged in water. The axle lubricant should
be changed any time the rear axle has been submerged in water.
Fill 6 mm to 14 mm (1/4 inch to 9/16 inch) below bottom of fill hole.
Add 118 ml (4 oz.) of Additive Friction Modifier C8AZ-19B546-A or
equivalent meeting Ford specification EST-M2C118–A, for complete refill
of 8.8 inch and 9.75 inch Traction-Lok axles.
3
Fill Dana rear axles to 6 mm to 19 mm (1/4 inch to 3/4 inch) below
bottom of fill hole.
4
Ford conventional and Traction-Lok axles require Motorcraft SAE
75W-140 Synthetic Rear Axle Lubricant F1TZ-19580-B or equivalent
meeting Ford specification WSL-M2C192-A. Add 118 ml (4 oz.) of
Additive Friction Modifier C8AZ-19B546-A or equivalent meeting Ford
specification EST-M2C118–A. Dana conventional and limited-slip axles
(E250/350/450)require Motorcraft SAE 80W-90 Premium Rear Axle
Lubricant XY-80W90-QL or equivalent meeting Ford specification
WSP-M2C197-A. Add 177ml (6 oz.) of Additive Friction Modifier
C8AZ-19B546-A or equivalent meeting Ford specification EST-M2C118-A.
Capacities and specifications
202