Ford 1996 Aspire Page 80 Manual Download

Page: 80 / 268

[IP17700(ALL)01/92]

Interior Lights

[IP20500(ALL)01/95]

Lighting Up the Interior and Instrument
Panel

[IP20600(ALL)01/92]

With the parking lamps or headlamps on, the
brightness of the instrument panel lighting can
be adjusted.

[IP20700(ALL)09/93]

To brighten or dim the instrument panel
lighting, rotate the dimmer control thumbwheel
as desired.

[IP20850(ALL)09/93]

quarter page art:0032171-B

Dimmer control thumbwheel

[IP20900(ALL)09/93]

The dimmer control thumbwheel is located to
the right of the steering wheel on the instrument
panel.

[IP21800(ALL)05/93]

Interior Courtesy Lamp

[IP22500(ALL)07/95]

Your vehicle is equipped with an interior
courtesy lamp with a three-position switch.

[IP22600(ALL)05/95]

❑

OFF-light will not turn on

[IP22700(ALL)05/95]

❑

DOOR-light will turn on when the door is
open

[IP22800(ALL)05/95]

❑

ON-light is always on in this position

File:06icipf.ex

Update:Wed Jan 24 14:47:07 1996

Summary of Contents for 1996 Aspire













































































































































































































































































Search results

Summary of Contents for 1996 Aspire

Reviews:

Related manuals for 1996 Aspire

Brands by name

Popular brands

Ford 1996 Aspire, Manual

Search results

Summary of Contents for 1996 Aspire

Reviews:

Related manuals for 1996 Aspire

Brands by name

Popular brands