manualshive.com logo in svg

Ford 1996 Aspire, Manual

Share
Download
Ford 1996 Aspire Manual Download Page 47

45

*

[ST02820(ALL)06/93]

3.

Push and hold the thumb button.

[ST02830(ALL)09/93]

4.

Move the gearshift lever.

*

[ST02832(ALL)07/95]

If you need to shift out of P (Park) by using the
alternate procedure described above, it is
possible that a fuse has blown and that your
brakelamps may also not be functional. Please
refer to the chapter titled Servicing Your Aspire in
this Owner Guide for instructions on checking
and replacing fuses.

*

[ST02835(ALL)05/95]

R

WARNING

DO NOT DRIVE YOUR VEHICLE UNTIL
YOU VERIFY THAT THE BRAKELAMPS
ARE WORKING.

%

*

[ST02850(ALL)03/95]

Ignition Key Chime

*

[ST02875(ALL)10/90]

If the driver or passenger door is open while the
key is still in the ignition, a warning chime
sounds.

%

*

[ST02900(ALL)02/95]

Removing the Key From the Ignition

*

[ST03000(ALL)09/93]

1.

Put the gearshift selector lever in P (Park)
(automatic transaxle) or 1 (First) (manual
transaxle).

*

[ST03100(ALL)01/95]

2.

Set the parking brake fully.

[ST03450(ALL)12/93]

3.

Push the key in (manual transaxle) and turn
it to the LOCK position.

*

[ST03500(ALL)03/95]

4.

Remove the key.

*

[ST03700(ALL)06/95]

R

WARNING

Always set the parking brake fully and
make sure that the gearshift is securely
latched in P (Park) (automatic transaxle) or
in 1 (First) (manual transaxle).

File:04icstf.ex

Update:Wed Jan 24 14:30:41 1996

Summary of Contents for 1996 Aspire













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands